Heavy Duty Mixed Fleet Extended Life 50/50 Premixed Antifreeze/Coolant
Turbo Power® Heavy Duty Mixed Fleet Extended Life 50/50 Premixed Antifreeze/Coolant is based on a proprietary Hybrid Organic Acid Technology (HOAT). It has been specifically designed for complete mixed fleet use and can be used in all makes and models of foreign and domestic passenger vehicles, light duty and heavy duty diesel applications. This low silicate, organic additive, ethylene glycol based, extended service product is free of phosphates, borates, nitrites and amines. It will provide extended protection against rust, corrosion and pitting caused by cavitation for all coolant system metals, including aluminum. It also provides protection against wet sleeve liner cavitation and is compatible with the flux found in controlled atmosphere brazed (CAB) radiators. In addition to normal product development testing, this product has been evaluated for chemical and performance compatibility with a wide range of different engine coolant technologies (including Asian, European and North American) using ASTM D1384, D2809 and D4340.
It offers excellent protection against temperature extremes, preventing freeze-up and boil-over when used in accordance with OEM and product manufacturer’s guidelines regarding product dilution. This product does not impart any significant colour change if mixed with another engine coolant. The superior performance and stability of this product’s premium extended life corrosion inhibitors allows them to go on working well beyond the lifetime of traditional products. When Turbo Power® Heavy Duty Mixed Fleet Extended Life 50/50 Premixed Antifreeze/Coolant is added as an initial fill and properly maintained in accordance with engine manufacturer’s maintenance recommendation, it will provide up to 250,000 km or 5 years of service life protection in automotive application and up to 960,000 km or 6 years of service life protection in heavy duty diesel use.
Turbo Power® Heavy Duty Mixed Fleet Extended Life 50/50 Premixed Antifreeze/Coolant meets the performance requirements of the following engine coolant specifications: ASTM D3306, D4985, D6210-10, D7583, AS. NZ 2108.1:1997 Type A, BS 6580, DDC 93K217, GM 1825M & 1899M, JIS K2234 and is recommended for use in Caterpillar, Chrysler MS7170 & MS9769, Cummins 14603, Ford ESE-M97B44A, WSS-M97B44D, WSS-M97B51-A1, Freightliner 48-22880, GM 6277M, GM Heavy Truck, International Truck & Engine CEMS B-1, Kenworth, MACK, PACCAR / DAF and VW TL 774G.
Turbo Power® Heavy Duty Mixed Fleet Extended Life 50/50 Premixed Antifreeze/Coolant offers the following advantages:
- Complete Mixed fleet use; heavy duty diesel, light truck and automotive
- Borate, nitrite, amine and phosphate free
- Fully compatible with IAT, HOAT and OAT coolant technologies
- Protects coolant system metals such as brass, copper, solder, steel, cast iron and aluminum
- Protects against wet sleeve liner cavitation
For more information on TURBO POWER® Engine Coolants for your application contact your Recochem representative.
| Container Size | Units | Carton Size | Gross | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Item # | Size | UPC | H (cm) | L (cm) | W (cm) | /Case | H (cm) | L (cm) | W (cm) | Weight | SCC14 |
| 16-324 | 3.78 L | 056438163244 | 28.70 | 18.80 | 11.50 | 4 | 30.00 | 38.00 | 23.70 | 18.50 | 40056438163242 |
| 26-329 | 205 L | – | – | – | – | 1 | – | – | – | 251.00 | – |
| 26-329-1000 | 1000 L | – | – | – | – | 1 | – | – | – | 1220.00 | – |
Typical Product Properties
| Characteristic | Performance | Test Method |
|---|---|---|
| pH | 8.0 – 9.0 | ASTM D1287 |
| Specific gravityb | 1.065 – 1.085 | ASTM D1122 |
| Freeze point (°C/°F) | -37/ -34 | ASTM D1177 |
| Foam volume (ml) | 150 max. | ASTM D1881 |
| Foam break time (second) | 5 max. | ASTM D1881 |
| Chloride (ppm) | 25 max. | ASTM D3634 |
| Colour | Pale Yellow | |
| Glycol Content (wgt.%). | 48 min. | |
| Inhibitors and Water Content (wgt.%) | 52 max. | |
| Silicon, from silicate (ppm) | 130 max | ASTM D6130 |
| Boron (ppm) | < 10 | |
| Phosphorous (ppm) | < 10 |
b Measured at 15.6ºC/60ºF
Typical Coolant Performance Testing Results
| Metal Type | ASTM D 1384 GLASSWARE CORROSION | ASTM D 2570 SIMULATED SERVICE | ||
| Test Results¹ | Max. Spec. | Test Results¹ | Max. Spec. | |
| Copper | 1 | 10 | 2 | 20 |
| Solder | 1 | 30 | 2 | 60 |
| Brass | 1 | 10 | 1 | 20 |
| Steel | 0 | 10 | 1 | 20 |
| Cast Iron | -1 | 10 | 2 | 20 |
| Aluminum | 2 | 30 | 0 | 60 |
1 Weight loss, except negative sign which indicate weight gain, per coupon in milligrams. Values are for coolant made from virgin ethylene glycol.
| Test Results¹ | Specification | |
|---|---|---|
| ASTM D4340 Heat Rejecting Aluminum Corrosion (mg/cm²/week) | 0.1 | 1.0 maximum |
| ASTM D2809 Aluminum Water Pump Cavitation – Erosion Corrosion Rating | 9 | 8 minimum |
| ASTM D7583 Deere Liner Cavitation Test | 101 | 200 |
1 Weight loss per coupon in milligrams (average for 2 tests). Values are for coolant made from virgin ethylene glycol.
NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information.
Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem’s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner’s manual and to follow engine manufacturer’s instructions.