Universal 50/50 Premix Antifreeze/Coolant
Universal 50/50 Premix Antifreeze/Coolant is a superior quality ethylene glycol based engine coolant with a low silicate corrosion inhibitor package. This product protects coolant system metals, including heat-rejecting aluminum, against pitting caused by cavitation and corrosion. It provides protection against radiator freeze-up down to -37°C and boil over to 129°C (with a 100 kilopascal {15 psi} radiator cap in good condition). It is recommended for use in older model domestic and foreign cars and light duty trucks and will provide up to 80,000 km or 2 years service life when installed as initial fill, or after a complete flush and cleaning of a cooling system in reasonable condition. It is compatible with supplemental coolant additives (SCA) and coolant filters and thus can be used in heavy duty diesel coolant systems when pre-charged with SCA.
Turbo Power® Universal 50/50 Premix engine coolant offers the following advantages:
- Protects against winter freezing and summer boil over
- Prevents pitting caused by cavitation and corrosion of brass, copper, solder, steel, cast iron and aluminum
- Low silicate
- Aluminum compatible
- Premixed – DO NOT ADD WATER
Turbo Power® Universal Antifreeze/Coolant meets the performance requirements of the following engine coolant specifications:
- ASTM D-3306, D-4985
- Chrysler MS7170
- Ford ESE-M97B44-A
- GM 1825M, 1899M
- TMC RP 302B
| Container Size | Units | Carton Size | Gross | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Item # | Size | UPC | H (cm) | L (cm) | W (cm) | /Case | H (cm) | L (cm) | W (cm) | Weight | SCC14 |
| 16-422 | 1.89 L | 056438164227 | 21.00 | 14.50 | 7.50 | 6 | 21.80 | 31.80 | 28.80 | 13.80 | 60056438164229 |
| 16-424 | 3.78 L | 056438164241 | 28.70 | 18.80 | 11.50 | 4 | 30.00 | 38.00 | 23.70 | 17.50 | 40056438164249 |
| 26-428 | 205 L | – | – | – | – | 1 | – | – | – | 251.00 | – |
| 26-429 | 205 L | 056438264293 | – | – | – | 1 | – | – | – | 251.00 | – |
| 26-429-1000 | 1000 L | – | – | – | – | 1 | – | – | – | 1169.00 | – |
- 26-428 Western Region
- 26-429 Eastern Region
For more information on TURBO POWER Engine Coolants for your application please contact your Recochem representative.
Typical Product Properties
| Characteristic | Performance | Test Method |
|---|---|---|
| pH | 10 – 11 | ASTM D1287 |
| Specific gravityb | 1.070 – 1.090 | ASTM D1122 |
| Freeze point, °C/°F | -37/-34 | ASTM D1177 |
| Foam volume, ml | 150 max. | ASTM D1881 |
| Foam break time, second | 5 max. | ASTM D1881 |
| Reserve Alkalinity, ml | 3.4 min. | ASTM D1121 |
| Chloride, ppm | 25 max. | ASTM D3634 |
| Silicon (from silicate), ppm | 125 max. | ASTM D6130 |
| Colour | Green | |
| Glycol Content (wgt.%) | 46 min. | |
| Inhibitors and Water Content (wgt.%) | 54 max. |
b Measured at 15.6ºC/60ºF
Typical Coolant Performance Testing Results
| Metal Type | ASTM D 1384 GLASSWARE CORROSION | ASTM D 2570 SIMULATED SERVICE | ||
| Test Results¹ | Max. Spec. | Test Results¹ | Max. Spec. | |
| Copper | 1 | 10 | 2 | 20 |
| Solder | 4 | 30 | 0 | 60 |
| Brass | 2 | 10 | 1 | 20 |
| Steel | 2 | 10 | 1 | 20 |
| Cast Iron | 3 | 10 | 0 | 20 |
| Aluminum | 3 | 30 | -1 | 60 |
¹ Weight loss, except negative sign which indicate weight gain, per coupon in milligrams. Values are for coolant made from virgin ethylene glycol.
| Test Results¹ | Specification | |
|---|---|---|
| ASTM D4340 Heat Rejecting Aluminum Corrosion (mg/cm²/week) | 0.2 | 1.0 maximum |
| ASTM D2809 Aluminum Water Pump Cavitation- Erosion Corrosion Rating | 9 | 8 minimum |
¹ Weight loss per coupon in milligrams (average for 2 tests). Values are for coolant made from virgin ethylene glycol.
NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information.
Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem’s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner’s manual and to follow engine manufacturer’s instructions.