Universal 50/50 Premix Antifreeze/Coolant

Universal 50/50 Premix Antifreeze/Coolant is a superior quality ethylene glycol based engine coolant with a low silicate corrosion inhibitor package. This product protects coolant system metals, including heat-rejecting aluminum, against pitting caused by cavitation and corrosion. It provides protection against radiator freeze-up down to -37°C and boil over to 129°C (with a 100 kilopascal {15 psi} radiator cap in good condition). It is recommended for use in older model domestic and foreign cars and light duty trucks and will provide up to 80,000 km or 2 years service life when installed as initial fill, or after a complete flush and cleaning of a cooling system in reasonable condition. It is compatible with supplemental coolant additives (SCA) and coolant filters and thus can be used in heavy duty diesel coolant systems when pre-charged with SCA.

Universal 50/50 Premix engine coolant offers the following advantages:

  • Protects against winter freezing and summer boil over
  • Prevents pitting caused by cavitation and corrosion of brass, copper, solder, steel, cast iron and aluminum
  • Low silicate
  • Aluminum compatible
  • Premixed – DO NOT ADD WATER

Universal Antifreeze/Coolant meets the performance requirements of the following engine coolant specifications:

  • ASTM D-3306, D-4985
  • Chrysler MS7170
  • Ford ESE-M97B44-A
  • GM 1825M, 1899M
  • TMC RP 302B

Product Packaging Specifications

Item# Size Case Pack UPC SCC14
16-422 1.89 L 6 056438164227 60056438164229
16-424 3.78 L 4 056438164241 40056438164249
26-428 205 L NA NA NA

26-429

205 L NA NA NA
26-429-1000 1000 L NA NA NA
  • 26-428 Western Region
  • 26-429 Eastern Region

 


Typical Product Properties

Characteristic Performance Test Method
pH 10 – 11 ASTM D1287
Specific gravityb 1.070 – 1.090 ASTM D1122
Freeze point, °C/°F -37/-34 ASTM D1177
Foam volume, ml 150 max. ASTM D1881
Foam break time, second 5 max. ASTM D1881
Reserve Alkalinity, ml 3.4 min. ASTM D1121
Chloride, ppm 25 max. ASTM D3634
Silicon (from silicate), ppm 125 max. ASTM D6130
Colour Green  
Glycol Content (wgt.%) 46 min.  
Inhibitors and Water Content (wgt.%) 54 max.  
b Measured at 15.6ºC/60ºF

Typical Coolant Performance Testing Results

Metal Type ASTM D 1384 GLASSWARE CORROSION ASTM D 2570 SIMULATED SERVICE
Test Results¹ Max. Spec. Test Results¹ Max. Spec.
Copper 1 10 2 20
Solder 4 30 0 60
Brass 2 10 1 20
Steel 2 10 1 20
Cast Iron 3 10 0 20
Aluminum 3 30 -1 60
¹ Weight loss, except negative sign which indicate weight gain, per coupon in milligrams. Values are for coolant made from virgin ethylene glycol.

 

Test Results¹ Specification
ASTM D4340 Heat Rejecting Aluminum Corrosion (mg/cm²/week) 0.2 1.0 maximum
ASTM D2809 Aluminum Water Pump Cavitation- Erosion Corrosion Rating 9 8 minimum
¹ Weight loss per coupon in milligrams (average for 2 tests). Values are for coolant made from virgin ethylene glycol.
NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information.
Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem’s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner’s manual and to follow engine manufacturer’s instructions.