STP® Global Extended Life Antifreeze/Coolant
STP® Global Extended Life Antifreeze/Coolant is recommended for use in all makes and models of foreign and domestic passenger vehicles and light duty trucks. It contains a proprietary formulation of premium corrosion inhibitors that provide extended protection against rust, corrosion and pitting caused by cavitation for all coolant system metals. It also provides excellent protection against temperature extremes, preventing freeze-up and boil over when used in accordance with OEM and product manufacturer’s guidelines regarding product dilution.
This product does not impart any color change if mixed with another engine coolant. The superior performance and stability of premium extended life corrosion inhibitors allows them to go on working well beyond the lifetime of traditional products. When STP® Global Extended Life Antifreeze/Coolant is added to a coolant system after a complete drain, flush and fill, this product provides up to 150,000 miles or 5 years of protection.
STP® Global Extended Life Coolant offers the following advantages:
- Recommended for use in all makes, all models of foreign and domestic passenger vehicles and light duty trucks
- Add as top-up to any color antifreeze
- Protects all coolant system metals, including aluminum
- Guarantee: Up to 5 years or 150,000 miles protection whichever comes first when added as initial fill or when added to a well maintained, clean coolant system after a complete drain, flush and fill
- Extended coolant system performance
- Available as a 50/50 pre-diluted
STP® Global Extended Life Antifreeze/Coolant meets the performance requirements of the following engine coolant specifications:
- ASTM D-3306
- JIS K-2234
Never use 100% coolant in concentrated form. A 50% dilution (i.e. when mixed with an equal volume of high quality soft, de-ionized or distilled water) is generally recommended for the best balance of protection against freezing, corrosion and summer boil-over. For increased freeze protection in extremely cold areas, a 60% volume concentration can be used. Concentrations of greater than 70% by volume are not recommended. High quality soft, de-ionized or distilled water should always be used to dilute coolant concentrate. For added value and convenience, this product is available in a ready to use format, pre-diluted to 50% volume using de-ionized water.
| Container Size | Units | Carton Size | Gross | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Item # | Size | UPC | H (cm) | L (cm) | W (cm) | /Case | H (cm) | L (cm) | W (cm) | Weight | SCC14 |
| 36-104STPEXP | 1 Gal. | 059934901204 | 28.70 | 18.80 | 11.50 | 4 | 30.00 | 38.00 | 23.70 | 18.30 | 40059934901202 |
| 36-104STPXPR | 1 Gal. | 059934903505 | 28.70 | 18.80 | 11.50 | 4 | 30.00 | 38.00 | 23.70 | 18.30 | 40059934903503 |
The STP trademark and logo are registered trademarks of The Armor All/STP Products Company and used under license by Recochem Inc. All rights reserved.
Typical Product Properties
| Characteristic | Performance | Test Method |
| pHa | 7.5 – 8.5 | ASTM D1287 |
| Specific gravityb | 1.120 – 1.140 | ASTM D1122 |
| Freeze pointa, °C/°F | -37/ -34 | ASTM D1177 |
| Foam volume, ml | 150 max. | ASTM D1881 |
| Foam break time, second | 5 max. | ASTM D1881 |
| Reserve Alkalinity, ml | 3.0 min. | ASTM D1121 |
| Chloride, ppm | 25 max. | ASTM D3634 |
| Color | Pale Yellow | |
| Glycol Content (wgt.%). | 93 min. | |
| Inhibitors and Water Content (wgt.%) | 7 max. | |
| Silicon (ppm) | < 10 | ASTM D6130 |
| Boron (ppm) | < 10 | |
| Phosphorous (ppm) | < 10 |
a 50% volume aqueous solution
b Measured at 15.6ºC/60ºF
Typical Coolant Performance Testing Results
| Metal Type | ASTM D 1384 GLASSWARE CORROSION | ASTM D 2570 SIMULATED SERVICE | ||
| Test Results¹ | Max. Spec. | Test Results¹ | Max. Spec. | |
| Copper | 1 | 10 | 2 | 20 |
| Solder | 3 | 30 | 20 | 60 |
| Brass | 0 | 10 | 5 | 20 |
| Steel | 0 | 10 | 3 | 20 |
| Cast Iron | 1 | 10 | 2 | 20 |
| Aluminum | 12 | 30 | 20 | 60 |
¹ Weight loss, except plus signs which indicate weight gain, per coupon in milligrams. Values are for coolant made from virgin ethylene glycol.
| Test Results¹ | Specification | |
|---|---|---|
| ASTM D4340 Heat Rejecting Aluminum Corrosion (mg/cm²/week) | 0.1 | 1.0 maximum |
| ASTM D2809 Aluminum Water Pump Cavitation- Erosion Corrosion Rating | 9 | 8 minimum |
¹ Weight loss per coupon in milligrams (average for 2 tests). Values are for coolant made from virgin ethylene glycol
NOTICE: This product is shipped in compliance with applicable laws and regulations regarding classification, packaging, shipping and handling. The performance and physical property data described for this product are typical results not sale specifications, except where maximum or minimum is indicated. Refer to Material Safety Data Sheets for further information.
Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible for determining whether product and the information in this document are appropriate for their use and for ensuring that their workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Recochem’s warranty is limited to the claims of product meeting stated performance specifications. It is the responsibility of the end-user to determine product suitability as recommended in the owner’s manual and to follow engine manufacturer’s instructions.